Gas Combination Water Heaters

Bradford Gas Combination Water Heaters
 
 
 
Type 1: With Dedicated Heat Exchanger
 

DEFENDER SAFETY SYSTEM® COMBI2™ AND NON-DEFENDER MODELS

The Combi2™ is the ultimate system for perfect home comfort and potable water from a single energy-saving source. The secret lies in the patented 1½" O.D. glass coated (Vitraglas®)steel coil heat exchanger. First, the Combi2™ heats the potable water in the tank. Then, the heat from the hot water is efficiently transferred through the heat exchanger to the heating fluid within the coil. 75-gallon model does not include the Defender Safety System®.
 

Defender Safety System Features

  • Advanced ScreenLok® Technology Flame Arrestor design
  • Resettable thermal switch
  • Piezo ingiter
  • Maintenance free
  • Pedestal base 
  • Site Window 

Standard Energy Saver Features

  • Heat exchanger - 1½" O.D. glass coated (Vitraglas®)steel coil
  • Low heat exchanger head loss - Up to 10 GPM flow, with less than 5 ft. of head loss
  • Factory installed Hydrojet® Total Performance System
  • Vitraglas® lining
  • Factory installed dielectric waterway fittings
  • Two protective aluminum anode rods
  • T&P relief valve installed
  • Thermostatic mixing valve
  • Brass drain valve
  • 2" Non-CFC foam insulation
  • 10-year limited warranty on tank and heat exchanger


COMBI2™ TTW® MODELS

The Combi2™ TTW® offers the same dual performance aspects as the original Combi2™ atmospheric vent but with one notably difference. This product is power vented which allows combustion gases to be expelled through the nearest outside wall or through the roof. 75-gallon model does not include the Defender Safety System®.
 

Defender Safety System features
  • Advanced ScreenLok® Technology Flame Arrestor Design
  • Flammable Vapor Sensor
  • Maintenance Free
  • Pedestal Base
Standard Energy Saver Features
  • Heat exchanger - 1½" O.D. glass coated (Vitraglas®)steel coil
  • Low heat exchanger head loss-Up to 10 GPM flow, with less than 5 ft. of head loss.
  • Vitraglas® lining
  • Factory installed dielectric waterway fittings
  • Thermostatic mixing valve
  • Power Vented for positive exhaust during main burner operation
  • Two protective aluminum anode rods
  • Electronic gas control valve with LED display
  • Spark to pilot ignition system
  • T&P relief valve installed
  • Brass drain valve
  • 2" Non-CFC foam insulation
  • 10-year limited warranty on tank and heat exchanger

 
Type 2: With Side Connections for Combination Heating Applications
 

DEFENDER SAFETY SYSTEM® ENERGY SAVER (XR) MODELS AND NON-DEFENDER MODELS
 
These conventional (atmospheric) vent water heaters offer side connections for space heating and “Extra Recovery” (XR) that translates to an increased amount hot water available for heating or potable use. 65 and 75 gallon models do not include Defender Safety System®
 
Defender Safety System features
  • Advanced ScreenLok® Technology Flame Arrestor Design
  • Resettable Thermal Switch
  • Piezo Ingiter
  • Maintenance Free
  • Pedestal Base
  • Sight Window
Standard Energy Saver Features
  • Factory Installed Hydrojet® Total Performance System
  • Vitraglas® Lining
  • Factory installed dielectric waterway fittings
  • Fully automatic controls
  • Flue Baffle
  • Protective magnesium anode rod
  • Side tappings
  • Snap-lock draft diverter
  • T & P Relief Valve included
  • Brass drain valve
  • 2" Non-CFC foam insulation (1" on M1 models)

DEFENDER SAFETY SYSTEM® TTW2® MODELS
 
Similar to our TTW®1 models, the TTW®2 offers higher BTU inputs, two inches of insulation and an 80% recovery efficiency. Just like the TTW®1, the TTW®2 offers extremely flexible venting options.
 
 Defender Safety System features
  • Advanced ScreenLok® Technology Flame Arrestor Design
  • Flammable Vapor Sensor
  • Maintenance Free
  • Pedestal Base
  • Powerful Blower Motor
  • Sight Window
  • Spark to Pilot Ignition System
  • Electronic Gas Control Valve
  • Stainless Steel Flue Baffle
 
 
Standard Energy Saver Features

  • Factory Installed Hydrojet® Total Performance System
  • Vitraglas® Lining
  • Factory Installed dielectric waterway fittings
  • Fully automatic controls
  • Flue baffle
  • Protective magnesium anode rod
  • Side tappings
  • Snap-lock draft diverter
  • T&P Relief Valve Included
  • Brass drain valve
  • 2" Non-CFC foam insulation (1" on M1 models)

DEFENDER SAFETY SYSTEM® HIGH-INPUT DIRECT VENT ENERGY SAVER MODELS
 
Our second-generation Direct Vent water heaters offer higher inputs and gallon capacities. Our same co-axial venting will go up to eight feet vertically and horizontally.
 


DEFENDER SAFETY SYSTEM® POWER DIRECT VENT MODELS
 
Power Direct Vent models offer a flexible independent venting system. It too takes combustion air from the outside but incorporates a power-blower to expel combustion gases.